The Monarch Nozzle 0.50 x 60° Spray Angle is a precision-engineered oil burner nozzle designed for efficient fuel atomization in industrial oil burners, boilers, furnaces, and heating systems. Known for its accurate spray pattern and consistent performance, this Monarch burner nozzle ensures proper fuel distribution, helping improve combustion efficiency and stable burner operation. The 0.50 x 60° spray angle nozzle delivers fine fuel mist for clean and efficient burning in demanding industrial environments. Widely used in industrial combustion systems and burner assemblies, it supports reliable burner performance. Mahalaxmi Sales, a trusted industrial equipment supplier in Ahmedabad, offers genuine Monarch oil burner nozzles, burner spare parts, combustion components, and industrial burner accessories.

Monarch produces oil burner nozzles for all oils with viscosity to 5 mm2/s (cSt). Special nozzles can be used for oils with a viscosity up to 13 mm2/s (cSt). QUALITY AND PERFORMANCE No equal to efficiency and operating life span. Traditional commitment of one-by-one testing for: Capacity Spray Angle Uniformity of Atomization Guaranteed for flawless performances. There is no doubt . . . the MONARCH Nozzle is the established leader, worldwide. PRECISE CONSTRUCTION MONARCH's manufacturing micro-tolerances guarantee exact consistency of every single nozzle, box by box, year after year. Each year, millions of MONARCH nozzles are fitted all over the world, on new burners or as replacement parts. The use of a MONARCH nozzle provides you, and your customer perfect functioning of each unit. All MONARCH nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards: - the flow (in USGPH at l00 PSI = 6.895 bar) (soon, capacity at 10 bar and CEN references) - spray angle - letters to identify the series of spray patterns - the reference MTD-92 - the MONARCH trade mark. Each MONARCH MTD-92 nozzle is individually tested at several different production stages to assure perfect conformity with master nozzles of each series. The spray patterns (i.e. hollowcone or solid cone) described below refer to the tests carried out with a 60° angle at a75 mm distance from the nozzle orifice. In nozzles of a 60° spray angle or less, and forlow flows in particular, the empty section of a hollow cone becomes smaller. The difference between hollow cone and solid cone practically disappears. Solid Cone “R” Series: .40 to 3.50 USGPH This is the series supplied regularly unless customer specifies otherwise. Itis a good all-round nozzle suitable for most burners. Atomization of the oil is not quiteas fine as with the “NS” series. HollowCons “NS” Series: .50 to 2.00 USGPH This Series works best on many burners due to its exceptionally fine atomization. Produces a quiet stable flame. Widely used in 80° and 90° on flame retention burners. Special Solid Cone “AR” Series: .50 to 3.50 USGPH This series has become widely used due to its success in obtaining quiet combustion in some flame retention head burners. Traditionally a “cure-all”replacement nozzle, it now is increasingly specified on original equipment. Semi-SolidCone “PLP” Series: 2.25 to 100.00 USGPH The standard nozzle for larger capacities. Fine atomization and”solid” spray pattern up to about 3.50 USGPH, gradually becoming more and more ”hollow” in the larger sizes. HollowCone “PL” Series: 2.25 to 50.00 USGPH This series represents an extension of the “NS” type spray pattern tolarger capacity sizes. Spray is not as finely atomized as the “PLP” series, but produces the best results in equipment specifying hollow cone nozzles. NarrowSpray Angle “HV” Series: 1.65 to 60.00 USGPH Used mostly for Semi-Industrial or Scotch Marine applications where narrow spray angle and high spray velocity is essential and some combustion noise is not objectionable. Heavy OilNozzle “HO“ Series: 1.25 to 100.00 USGPH Designed for use on 70 SSU (approx. 13 centistokes) operating viscosity oil atoperating pressures ranging from 200-450 PSIG (13.8 to 31 bar).